Jaguar 02 Sensor Information Sheet

This document is courtesy of  Steve Petry

This document is intended to help in the understanding of OBDII parameters, known as 'PID's, and give them definition.  It is intended to be only a basic, not a technical guide to scantool data.  These PIDS are used by the OBDII system and by scantools that interact with the systems for diagnostics and and system interrogation.  PID stands for Parameter Identification, and in practice is rather cryptic.  The scantool, luckily, takes this cryptic, bit and byte data shorthand and translates it for us, so it is more understandable.  OBDII PID Parameters

 

Follow Gus_jagrepair on Twitter

You should follow JagRepair.com on Twitter

See us on Facebook

 

 

Please support JagRepair.com

 

 

Home | Contact Us!

JagRepair.com is designed as an information resource and is not a forum.

All information provided is believed to be correct and it is given in good faith. Users of this information will use good judgment and comply with all the safety rules that apply to operating tools and equipment. JagRepair.com cannot be held responsible if any of the information provided is not correct or does not work for you. Owner of the vehicle accepts responsibility with any and all applications they choose to use.

JAGUAR and its logo are the registered trademarks of Jaguar Land Rover Limited. Jaguar Land Rover Limited is not affiliated with JagRepair.com.

JagRepair.com 2012 - 2017 by Gus Glikas. All rights reserved.
The JagRepair logos and all proprietary artwork, photos and content are the property of Gus Glikas and may not be reproduced or distributed without expressed written permission.