Alarm Remote Manual Programming XK

 

· Insert key into the Ign.

· Pull the headlamp stalk towards the steering wheel.

· While holding the headlight stalk in the position above, turn the Ign to Aux.

· With Ign in Aux, flash the headlights 3 times, an audible confirmation should be heard. [Sometimes this step requires flashing 4 times. SP 7/20/05]

· Press any button on the remote(s) to be programmed.

· After confirmation of the remotes programmed switch off the Ign.

 When carrying out the above process, please ensure that no other vehicles within a 50 meter radius are undergoing the same programming procedure; this could affect the programming operation.

 

 

Follow Gus_jagrepair on Twitter

You should follow JagRepair.com on Twitter

See us on Facebook
 

 

Please support JagRepair.com

 

 

Home | Contact Us!

JagRepair.com is designed as an information resource and is not a forum.

All information provided is believed to be correct and it is given in good faith. Users of this information will use good judgment and comply with all the safety rules that apply to operating tools and equipment. JagRepair.com cannot be held responsible if any of the information provided is not correct or does not work for you. Owner of the vehicle accepts responsibility with any and all applications they choose to use.

JAGUAR and its logo are the registered trademarks of Jaguar Land Rover Limited. Jaguar Land Rover Limited is not affiliated with JagRepair.com.

JagRepair.com © 2012 - 2017 by Gus Glikas. All rights reserved.
The JagRepair logos and all proprietary artwork, photos and content are the property of Gus Glikas and may not be reproduced or distributed without expressed written permission.